Let’s Talk About Epson Printer Recovery Mode Fix

There is a very common issue reported with Epson printers i.e. it gets stuck in the recovery mode. Many users say that the Epson printer recovery mode fix is required to continue with the printing tasks. This issue occurs when the printer driver’s update process is obstructed or interrupted. If the user commits a wrong step or in case the update process is hindered by internet connectivity then the printer jobs will be troublesome and can’t be executed anymore. If you are looking for an Epson printer recovery mode fix then this is the right place for you. This blog explains the causes of the Epson printer being frozen in recovery mode and the tips to fix it to continue printing.

Main Reasons Behind Epson Printer Stuck In Recovery Mode: 

Read the following points to know what caused the Epson printer to get stuck in the recovery mode so that you can solve the issue by taking appropriate steps;

  • If the internet connectivity is poor which causes the driver update process to fail.
  • In case, there was a power outage while the printer drivers were updating then, the process will be hindered.
  • If the printer driver installation process was canceled then you will face this error.
  • If someone detaches the power cord of the Epson printer or PC device while the Epson printer update is going on.

Some Prerequisites Of Epson Printer Recovery Mode Fix:

Before moving ahead to do the fix make sure you check the following parameters;

  1. Make sure that the internet connection is active, stable, and working fine.
  2. Ensure that the power or other cables are tightly attached so there is no risk of them getting unplugged.
  3. Make sure there are some sort of power back-ups like inverters or generators, to avoid obstruction in the update process if there is a power outage.

Easy Steps For Epson Printer Recovery Mode Fix:

When you understand the causes why the Epson printer is stuck in recovery mode then you need to find a suitable solution to troubleshoot this problem. Follow the points below for Epson printer recovery mode fix;

  1. When your printer is frozen in recovery mode you must wait patiently till there is a prompt on the screen of the computer.
  2. On the pop-up message tap on the highlighted link, ‘Epson Firmware update download site’. 
  3. After hitting the link you will be taken to the next web page where you will observe a prompt to install the firmware update on your system.
  4. If you don’t see the pop-up window on your display then you need to go to the Epson printer official website once again and procure the Firmware recovery tool.
  5. You must visit the Epson printer’s official portal and look for the firmware update for your Epson printer model. 
  6. Now, proceed to download the update on your system.
  7. After finishing the download process, you need to update the printer by installing the firmware updates to the system.

Epson Printer Is Now Fixed!

Fantastic! Here you are printing on your Epson again. Where else could you find a better Epson printer recovery mode fix? Just here! Enjoy printing again.

Comments

Popular posts from this blog

How do I Setup my Canon TS3122 Wireless Printer for Mac?

HP OfficeJet 5255 Printer in Error State? Troubleshooting Steps To Fix the issue.

How Do I Scan From Printer to Laptop using Windows?