Steps To Do Canon Pixma MG 2920 WiFi Setup

An All-in-one Canon Pixma MG 2920 Printer is your best bet if you are looking for a multifunctional printer for your office or home. Its varied features make it a delight for users. The quiet mode, the hybrid ink system, my image garden software, and so on… are some of its special features that make you enjoy printing. Its auto power mode due to wireless connectivity is such a convenient function. To use its features you must do the wireless setup. For, Canon Pixma MG 2920 Wifi Setup follows the steps mentioned in this blog. Now, before moving forward ensure that your printer is turned on and then we will start with the setup process on your computer.

Cordless Setup Of The Canon Pixma MG 2920 Printer:

Canon Pixma MG 2920 is a wireless printer and so before doing the wireless setup we need to do the physical setup, and because it is wireless, this setup is quite easy and simple. Follow the steps below to start the setup;

  • Press + hold the Wifi Button on the printer till you see the light blinking 2 times.
  • Release the button when you see the wifi power turned on.
  • Ensure that your wifi lights are flashing. Switch the lights on.
  • Now, navigate to the screen application.
  • Finally, you have to do the Canon mg2920 wireless setup process.

The setup of your printer might take some time depending upon your network connection,  but here the setup process is complete.

Steps To Connect Canon MG 2920 To Wifi Using WPS Method:

After setting up the printer next you have to connect your Canon Pixma MG 2920 printer to the same wifi network you use on other devices by using the WPS method i.e by using the wifi push button. Follow the guidelines for the same;

  • Ensure that the access point button is pressed and never off.
  • Now, press + hold the wifi button on your Canon MG 2920 Printer and keep holding till the light blinks.
  • Now, disconnect the wifi button when you see the light flashing.
  • Then, you will see that
  • The wifi lights will start blinking. The wifi light starts blinking.
  • Next, press + hold the access point button for around two hours.
  • Then, the wifi lights will be lit.

Steps To Canon MG 2920 Wireless Setup Using WPS Pin Code Method:

Next, you must complete the wireless setup by using the WPS Pin Code method, for that follow the step-by-step guidelines below;

  • Until you see the alarm light blinking 15 times, press the stop button and hold it on your Canon printer.
  • Now, shoot the stop button and hold it until the alarm light blinks 16 times on your Canon MG 2920.
  • Now, you have to follow the on-screen prompts to proceed further with the process of setup to set the WPS PIN code printed on the network configuration page.
  • After the completion of the whole setup process, the wifi light on the printer will switch.

Wifi Setup Complete!


Now, after following these steps your Canon Pixma MG 2920 Wifi Setup is complete. The setup process is quite easy and simple. It involves no confusing steps. The wireless printer automatically turns the power on whenever you give a printing, scanning command from your smartphone. So, now you can enjoy the benefits of this printer after completing the wireless setup.

Comments

Popular posts from this blog

How do I Setup my Canon TS3122 Wireless Printer for Mac?

HP OfficeJet 5255 Printer in Error State? Troubleshooting Steps To Fix the issue.

How Do I Scan From Printer to Laptop using Windows?